Modular Windshield WS 2 Kit
Product Code: 086003
The Modular Windshield WS 2 Kit is suitable for small diaphragm condenser microphones from 121mm up to 160mm in length with a 19-25mm diameter and a 3-Pin XLR connection.
Main Benefits:
- Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations
- The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology
Description
Tech Specs
Windshield Body Length: 210 mm
Total Windshield Length: 320 mm (includes the End Caps)
Height of Windshield: 100mm
Windjammer Fur Length: 40mm
Windjammer Fur Colour: Grey
Microphone Connector: XLR-3F
Max Wind-noise Attenuation: 50 dB
Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.
Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.
For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.
Compatibility
| AKG C391 B | Modular studio condenser microphone system including a cardioid capsule. Its application range shall include lecterns, places of wors... |
| AKG CK 1 451 | The classic cardioid capsule for the CMS range. The pattern was remarkably consistent across the frequency range. The 1S had a rising... |
| AKG CK 1 460 | A remote cardioid capsule introduced for use with the C 460 B preamplifier. |
| AKG CK 91 SE300 B | The flat frequency response and uniform polar pattern of the CK 91 make it ideal for general applications where suppression of off-ax... |
| AKG CK 92 SE300 B | The CK 92 offers exceptionally neutral presentation of a source in its ambient sound field, providing uniform results regardless of t... |
| AKG CK 93 SE300 B | Similar to the CK 91, the CK 93 provides additional attenuation of 90 degree off-axis sounds. In addition to a higher ratio of direct... |
| Audio-Technica AT 4021 | Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL ... |
| Audio-Technica AT 4053a; AT 4053b | Recommended for professional recording and critical applications in broadcast, the AT4053a has a direct-coupled, balanced output, whi... |
| Audio-Technica ATM 33a | Ideal for acoustic guitar, percussion, overheads, vocals and more, the ATM33a excels in both studio and stage applications. It offers... |
| BeyerDynamic M 160 | Double ribbon dynamic microphone with unique acoustic characteristics, especially suitable for use when recording digitally. |
| BeyerDynamic M 201 | A very sensitive dynamic microphone with an integral humbucking transformer to eliminate mains-borne interference when working near c... |
| BeyerDynamic MC 713 | For more information on this specific microphone, go to the BeyerDynamic website at http://europe.beyerdynamic.com. |
| BeyerDynamic MC 723 | For more information on this specific microphone, go to the BeyerDynamic website at http://europe.beyerdynamic.com. |
| DPA 4006 | The 4006 is phantom powered, which, together with its extended range of acoustic pressure equalisers and different protection grids, ... |
| DPA 4017C | Setting new standards for compactness within shotgun microphones and their applications, the modular 4017C is an exceptionally short ... |
| Schoeps CMC Series | For more information on this specific microphone, go to Schoeps website at http://www.schoeps.de/en/home |
| Sennheiser MKH 20 | An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu... |
| Sennheiser MKH 30 | An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output. Switchable pre-atte... |
| Sennheiser MKH 40 | An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output. There are switches ... |
| Sennheiser MKH 50 | An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output, switchable bass rol... |
Contents
 |
1 x Suspension Small (XLR-3F) Product Code: 040140 Suitable for small diaphragm condensers in a WS1 |
 |
1 x Connbox CB1 (XLR-3F) Product Code: 016901 Suitable for mono microphones with 3-pin XLR. |
 |
1 x Windjammer WJ 1 Product Code: 021501 Suitable for use with the Windshield 1 |
 |
1 x Windshield WS 1 |
 |
1 x XLR Holder MK II |
 |
1 x Boom Poles Adaptor |
 |
1 x Pistol Grip Handle with Lever |
2x Single Lyre 62 (19/25)
Brush
Hex head key
Videos
Resources
Modular Windshield Kit.pdf
Modular Windshield Kit
Modular Windshield Kit_08_14.pdf
Modular Windshield Kit (update 08_14)
WS1Kit_086004_040140.pdf
Spares for the Modular Windshield 1 Kit (086004)
